How To Maintain Your NC Servo Feeder for Optimal Performance ?
As one type of press feeder, excellent-precision machinery relies heavily on NC servo feeder because of its long service life, excellent feeding accuracy, low failure rates, and ease of use. Even the best machinery, for all its strength, needs routine maintenance to continue operating at optimal efficiency over time. Maintaining the stability and effectiveness of your NC servo feeder over the long run requires regular daily and occasional maintenance. Now for this type steel coil feeder, let's examine the crucial elements of upkeep.
I. Daily Maintenance
Drainage and Lubrication
* Lubrication: Use gear grease to maintain the NC servo feeder roller's gear component well-lubricated. To ensure peak performance, replace or refill the gear oil on a regular basis.
* Drainage: The NC servo feeder's three-point combination may get clogged with water over time, which would impair its operation. To guarantee seamless functioning, release any surplus water by pressing the assigned button situated beneath the water gathering area.
Examine
* Verify that the timer on the NC servo feeder is working properly.
* Clear the space between the rollers of any debris.
* Examine the NC servo feeder's gears for any foreign objects.
* Check that the pressure of gas and oil is normal and that pressure gauge readings fall within allowable bounds.
* Find and fix any leaks in the pneumatic supply network.
* Make that the feeding rollers are properly parallel.
* Check the NC servo feeder's various components for wear, dents, strange noises, or abnormalities in operation.
* Examine the operating panel's switches and indicator lights closely for any irregularities.
II. Periodic Maintenance
External Power Wiring Inspection:
* Check for leaks, damage, deformations, and short circuits in the external power wiring.
Operation Switches:
* Verify that the panel buttons work properly by looking for conductivity and oil contamination.
* Check to see if the buttons on the operating panel are moving.
Punch Press Cam Inspection:
* Verify that the cam rotates and operates normally.
* Examine the wear on contact parts and any oil contamination.
Examine the NC Servo Feeder Control Box:
* Make sure the relays are operating correctly and the wire connections are in tact.
Oil Pressure Machine Piping:
* Look for any irregularities in the state of the oil pressure machine piping.
Dust collection Check:
* Make sure the cooling fan is operating properly by checking the NC servo system for dust collection.
* To avoid overheating and possible damage to the control circuit or motor, regularly check and clean the cooling fan's filter.
Special Attention
* Extra Care: Before doing any work or making any adjustments, turn off the power to prioritize safety.
* Pneumatic device inspection and repair require stopping the air compressor and releasing any residual air.
* Seek expert assistance when examining and modifying starters, pressure devices, electromagnetic devices, etc.
* You may increase the NC servo feeder's lifespan and performance by following these thorough maintenance instructions, which will guarantee faultless operations throughout your manufacturing processes.
As the top steel coil handling equipment, Fanty Machinery provides high quality NC Server Feeder for your press line. Any inquiry or customized needs, pls contact us: fanty@sz-fanty.com.
